Contact usBookmark this pagePrint pageResize downResize up

EDM Baseline Certificates and Links

The Surveying and Spatial Information Regulation 2012 requires surveyors to verify their Electronic Distance Measuring (EDM) equipment in relation to the State Primary Standard of measurement, in the form of pillared testlines or baselines, at least once each year and immediately after service and repair.

For more information see the Surveyor Generals Directions No. 5 - Verification of Distance Measuring Equipment

The EDM Baseline Booking System is now available online.

Download the EDM Calibration Recording Sheet (PDF 60 KB)


Armidale Testline (PDF 380.0 KB) Armidale Reg13 Cert (PDF 367.3 KB)
Bankstown Testline (PDF 405.9 KB) Bankstown Reg13 Cert (PDF 355.4 KB)
Bega Testline – Decommissioned Refer to Nowra Testline or Watson, ACT Baseline
Coffs Harbour Baseline (PDF 485.5 KB) Coffs Harbour Reg13 Cert (PDF 358.0 KB)
Dubbo Baseline (PDF 407.1 KB) Dubbo Reg13 Cert (PDF 375.3 KB)
Eglinton Baseline (PDF 427.3 KB) Eglinton Reg13 Cert (PDF 381.9 KB)
Goulburn Testline – Decommissioned
Refer to Nowra Testline or Watson, ACT Baseline
Grafton Testline – Decommissioned
Refer to Coffs Harbour Baseline
Kingscliff Baseline (PDF 441.6 KB) Kingscliff Reg13 Cert (PDF 374.5 KB)
Lethbridge Park Baseline (PDF 464.3 KB) Lethbridge Park Reg13 Cert (PDF 345.6 KB)
Nowra Testline (PDF 394.3 KB) Nowra Reg13 Cert (PDF 342.4 KB)
Seaham Baseline (PDF 451.0 KB) Seaham Reg13 Cert (PDF 353.4 KB)
Taree Testline – Decommissioned 
Refer to Seaham or Coffs Harbour Baselines
Ulan Coal Baseline (PDF 401.5 KB)
Ulan Coal access and WHS documents (PDF 861.7 KB)
Ulan Coal Reg13 Cert (PDF 372.9 KB)
Wagga Testline (PDF 441.2 KB) Wagga Reg13 Cert (PDF 345.8 KB)
Wollongong Testline (PDF 407.5 KB) Wollongong Reg13 Cert (PDF 345.4 KB)
back to top